Features of HS2060UH48L American Standard Phase Loss（IP21）
6kW / BAT48V / 120Vac/240Vac
Reliable performance
Both the battery side and the load side have super strong load capacity, smooth voltage and current waveforms, and can drive inductive loads such as air conditioning, supporting unlimited load
Independent intelligent load/generator interface, compatible with existing PV system access, can operate without batteries (PV+grid combined power supply)
Even without a battery, it can be bypassed for output, and important loads will not be powered off; Dynamically adapt to high-power demands.
Economic benefits
2 MPPT channel, PV input can exceed twice times the rated power, supporting simultaneous full power charging and load, maximizing economic benefits.
Supports grid connected, off grid, and grid connected switching modes, with adaptive frequency and the ability to set charging and discharging strategies based on time of use electricity prices to achieve economical energy use
Super Protection
AICOT islanding protection, IP66 protection level, anti backflow (internal/external), PV reverse alarm, External CT reverse connection alarm and open circuit detection functions.
Friendly Design
High definition touch screen supports multiple languages; Charge discharge three-level transformation technology; Customized AC output voltage standard; Battery closing soft start and battery activation function.
| MODEL | HS2060UH48L |
| Battery Voltage | 48Vdc |
| Battery Type | Lead-acid, lithium batteries, gel batteries, etc |
| Output | |
| Rated Output Power | 6000W |
| Parallel Function | N/A |
| Rated Output Voltage | 120/240Vac |
| Rated Output Frequency | 50/60Hz Intelligent adaptive/configurable |
| Output Waveform | Pure sine wave |
| Max Efficiency (Peak) | 92% |
| Rated Current | 25.0A |
| Transfer Time | 10ms (Typical value) |
| PV Input | |
| Max PV Power | 6000W + 6000W |
| MPPT Voltage Range | 90~500Vdc |
| Max Input Voltage | 500Vdc |
| Max Charging Current | 120A ± 5A |
| Number of MPPT / Strings per MPPT | 2/1+1 |
| Mains / Generator Input | |
| Max Charging Current | 80A |
| Nominal Input Voltage | 120Vac~240Vac |
| AC Input Voltage Range | 90Vac (L-N) ~140Vac (L-N), 180Vac (L-L) ~280Vac (L-L) |
| Frequency Range | (47–55Hz) ±0.3 / (57–65Hz) ±0.3 |
| Battery Input | |
| Voltage Range | 40~60Vdc |
| Max Charging Current | 120A ± 5A |
| Default Charging Current | 40A |
| General Parameters | |
| Dimension (W×D×H)(mm) | 350 × 133 × 540 |
| Installation Method | Wall-mounted |
| Weight (kg) | 14.9 |
| Communication Mode | RS485/CAN Optional WiFi/4G |
| Protection Function | Over/Under Voltage Protection, Over/Under Frequency Protection, AC Output Short Circuit Protection, AC Output Overload Protection, High/Low Temperature Protection, PV Reverse Connection Alarm |
| Operating Environment | |
| Operating Ambient Temperature | -25℃ ~ 60℃ (>45℃ Derating) |
| Storage Ambient Temperature | -20℃ ~ 60℃ |
| Humidity | 5% ~ 95% Non-condensation |
| Altitude | 4000m (>2000m Derating) |
| Installation Environment | For indoor use only |
| Certifications | |
| Certification | FCC, UL |
| Certifications Standard | FCC 47 CFR Part 15, UL1741, TSCA, CA65 |
English
